Lithium Battery Charger Module (2S 18650 – 8.4V – 2A) USB Type-C
Original price was: 80.00 EGP.60.00 EGPCurrent price is: 60.00 EGP.
The 2S 8.4V USB Type-C Lithium Battery Charger Module provides a convenient way to charge two 18650 lithium-ion cells connected in series from a 5V USB supply. It features a compact boost-charging circuit, Type-C input, status indicators, and a 2A input-current configuration.
2S 8.4V USB Type-C Lithium Battery Charger Module – 2A
The 2S 8.4V USB Type-C Lithium Battery Charger Module is designed for charging two 3.7V lithium-ion or 18650 cells connected in series. A 2S battery pack has a nominal voltage of approximately 7.4V and reaches 8.4V when fully charged.
This compact module accepts power from a standard 5V USB Type-C supply. Its integrated step-up charging circuit increases the input voltage to the correct charging voltage for a 2S lithium battery pack. Therefore, it provides a convenient charging solution for portable electronics, robotics, DIY power systems, and rechargeable projects.
Features of the 2S 8.4V USB Type-C Lithium Battery Charger Module
The board includes a modern USB Type-C input, making it easy to power from a suitable USB adapter or power bank. It also provides solder pads for a wired power input when a USB connection is not required.
Onboard status LEDs indicate the charging condition. The CR indicator normally shows that charging is active, while the OK indicator shows that the battery has reached full charge or the board has entered constant-voltage mode.
Main Features
- Designed for 2S lithium-ion battery packs
- Suitable for two 18650 cells connected in series
- 7.4V nominal battery-pack voltage
- 8.4V full-charge voltage
- USB Type-C power input
- Recommended 5V DC input supply
- 2A input-current version
- Integrated step-up boost charging circuit
- Charging and full-charge LED indicators
- Compact and lightweight PCB
- Easy integration into portable projects
- Battery and input solder pads
Technical Specifications
- Battery configuration: 2S
- Compatible battery type: Lithium-ion or lithium-polymer
- Number of cells: Two cells connected in series
- Nominal pack voltage: 7.4V
- Full-charge voltage: 8.4V
- Input voltage: 3–6V DC
- Recommended input voltage: 5V DC
- Input interface: USB Type-C
- Current version: 2A input rating
- Approximate dimensions: 39 × 18 × 6.3mm
- Status indicators: CR and OK LEDs
- Quantity: One module
The actual battery charging current may be lower than 2A because the module must boost the 5V input to 8.4V. Charging performance also depends on the input adapter, USB cable, battery condition, wiring resistance, and module temperature.
Wiring Instructions
Connect the positive terminal of the complete 2S battery pack to BAT+ and the negative terminal to BAT− or GND, according to the labels printed on the board. Check the polarity carefully before applying power.
Use only two matched rechargeable lithium cells connected in series. Do not connect a single 3.7V cell, a 3S pack, or batteries with different capacities and conditions.
Applications
The 2S 8.4V USB Type-C Lithium Battery Charger Module is suitable for:
- Rechargeable robotics projects
- Portable Bluetooth speakers
- DIY 18650 battery packs
- Electronic test equipment
- Portable lighting systems
- Embedded electronic devices
- Educational and prototyping projects
Important Safety Information
This charger module does not provide individual cell-balancing connections. Use a suitable 2S BMS protection and balancing board with the battery pack. Never reverse the battery polarity, short the terminals, use damaged cells, or leave lithium batteries charging unattended.
