-15%
74HC48-7448 ( BCD to 7-Segment Decoder)
Original price was: 34.50 EGP.27.90 EGPCurrent price is: 27.90 EGP.
74HC32AP-7432 (Quad 2-Input OR Gate)
Original price was: 11.99 EGP.10.00 EGPCurrent price is: 10.00 EGP.
Zener Diode BZX79-C3V6 (3.6 Volt)
Original price was: 0.59 EGP.0.50 EGPCurrent price is: 0.50 EGP.
The BZX79-C3V6 is a 3.6V Zener diode for voltage regulation, reference, and protection circuits. It features a 500mW power rating, ±5% tolerance, and an axial DO-35 glass package.
50
People watching this product now!
Description
BZX79-C3V6 3.6V Zener Diode
The BZX79-C3V6 Zener Diode provides a nominal 3.6V breakdown voltage. It helps regulate voltage and protect sensitive circuit inputs from excessive voltage.
The axial leads make the diode suitable for breadboards and through-hole PCBs. In addition, the glass DO-35 package provides a compact solution for electronic circuits.
Key Features
- Provides a nominal 3.6V Zener voltage
- Offers a maximum power rating of 500mW
- Uses a ±5% voltage tolerance
- Comes in a compact DO-35 glass package
- Supports through-hole PCB mounting
- Works in voltage-reference circuits
- Helps clamp and limit excessive voltage
- Suits prototyping and educational projects
Technical Specifications
- Part Number: BZX79-C3V6
- Component Type: Zener voltage-regulator diode
- Nominal Zener Voltage: 3.6V
- Zener Voltage Range: 3.4V–3.8V
- Voltage Tolerance: Approximately ±5%
- Test Current: 5mA
- Maximum Power Dissipation: 500mW
- Mounting Type: Through-hole
- Package: DO-35 / SOD27
- Number of Leads: Two
- Polarity Marking: Cathode band
Polarity Identification
- Cathode: The side marked with a band
- Anode: The side without a band
For voltage regulation, connect the cathode toward the positive supply. Then, connect the anode toward ground.
Applications
Use the BZX79-C3V6 for:
- Voltage regulation
- Voltage-reference circuits
- Input overvoltage protection
- Signal clamping
- Voltage limiting
- Transistor protection
- Power supply circuits
- Arduino input protection
- Prototyping and educational circuits
Basic Connection
- Identify the cathode using the printed band.
- Connect a suitable series resistor.
- Connect the cathode toward the positive voltage.
- Connect the anode toward ground.
- Keep the diode power below its maximum rating.
Important Notes
- Always use a current-limiting resistor.
- Do not connect the diode directly across a power supply.
- Calculate the resistor according to the input voltage and required current.
- Keep the power dissipation below 500mW.
- Observe the correct polarity during installation.
- Actual voltage depends on current and operating temperature.
Package Contents
- 1 × BZX79-C3V6 3.6V Zener diode
