Thermocouple with MAX6675 Module K-Type

Thermocouple with MAX6675 Module K-Type is a high-quality electronic component designed for Arduino, prototyping, and educational electronics. This temperature sensor and module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide accurate temperature compensated measurement of the supplied K-Type thermocouple sensor. It has a 12 bit reolution providing temperature readings from 0oC to 1024oC (max temperature of supplied sensor is 450oC) with a resolution of 0.25oC. Screw terminals allow for connection to the thermocouples spade connectors and a 5 pin standard 0.1″ header provides an interface to a microcontroller such as an Arduino development board.

Supplied thermocouple sensor has a diameter of 4.5mm with a 6mm threaded mounting bolt. Total length of sensor including cable and spade connectors is ~100cm.

Specifications:

Thermocouple temperature range: 0 to 450oC
Module sensor temperature range (oC): 0 to 1024
Temperature resolution (oc): 0.25
Module supply voltage: 3 to 5.5V
Module current: 50mA
Module interface: Serial (SO, SCK, CS) 16 bit SPI compatible.
Termocouple accuracy (0-700oC): 8 LSBs
Termocouple disconnect detection.

Get some help from Below sites

– http://www.instructables.com/id/Arduino-and-Thermocouple-K-MAX6675/

For Link to Llibrary for MAX6675 for Arduino, Click below

– https://github.com/adafruit/MAX6675-library It’s perfect for DIY makers, students, and anyone building custom electronic circuits or STEM kits.