-24% Sold out
Flex/Bending Sensor 2.2" (56mm)
Original price was: 647.33 EGP.539.99 EGPCurrent price is: 539.99 EGP.
Brushless Motor 1400KV with Accessories
Original price was: 511.81 EGP.400.00 EGPCurrent price is: 400.00 EGP.
150W 6A Adjustable DC-DC Boost Converter ( 10–32V to 12–35V )
Original price was: 249.92 EGP.190.00 EGPCurrent price is: 190.00 EGP.
The 150W DC-DC Boost Converter increases a 10–32V DC input to an adjustable 12–35V DC output. It supports up to 6A output current and delivers up to 150W with adequate forced-air cooling.
Out of stock
36
People watching this product now!
Description
This adjustable DC-DC boost converter provides a higher and regulated output voltage from a lower DC input. Therefore, it works well in high-power electronics, automotive projects, portable power systems, and DIY power supplies.
The onboard potentiometer allows easy voltage adjustment. However, this module only increases voltage. The selected output voltage must always remain higher than the input voltage.
Key Features
- Adjustable step-up DC-DC voltage conversion
- 10–32V DC input range
- 12–35V DC adjustable output
- Up to 6A output current
- Up to 100W with natural cooling
- Up to 150W with effective forced-air cooling
- Conversion efficiency up to 94%
- Compact board with an aluminium heatsink
- Screw terminals provide secure wiring
- Suitable for high-power DIY applications
Technical Specifications
- Converter Type: Non-Isolated DC-DC Boost Converter
- Input Voltage: 10–32V DC
- Output Voltage: 12–35V DC, adjustable
- Maximum Input Current: 10A
- Maximum Output Current: 6A
- Natural-Cooling Power: Up to 100W
- Forced-Cooling Power: Up to 150W
- Conversion Efficiency: Up to 94%
- No-Load Current: Approximately 25mA
- Dimensions: Approximately 65 × 47 × 22mm
Applications
This boost converter suits several power projects, including:
- Adjustable DC power supplies
- Automotive and battery-powered projects
- Solar-powered systems
- LED lighting systems
- Robotics and electronics projects
- Portable equipment
- Compatible laptop power-input projects
Important Operating Notes
- This module raises voltage only and cannot reduce it.
- Adjust the output voltage with a multimeter before connecting the load.
- Use thick wires and secure terminals when drawing high current.
- Add forced-air cooling when operating above 100W.
- Install a suitable fuse or protection circuit at the input.
- The module has no reverse-polarity protection.
- The module has no reliable short-circuit protection.
- Always confirm the input polarity before switching on the power.
- Do not connect this module directly to an unprotected lithium battery pack for charging.
- Actual output power depends on the input voltage, output voltage, cooling, and load current.
Package Includes
- 1× 150W 6A Adjustable DC-DC Boost Converter Module
