LED Dimmer (12-24V 30A) 360W (with RF remote)
410.03 EGP Original price was: 410.03 EGP.385.00 EGPCurrent price is: 385.00 EGP.
Single-channel 12–24V DC LED dimmer with a three-button RF remote. Rated up to 30A total, or 360W at 12V, for brightness control of compatible single-colour LED strips.
12–24V 30A LED Dimmer with RF Remote
Adjust the brightness of compatible single-colour LED strips with this one-channel DC dimmer. The supplied three-button RF remote provides wireless on/off and brightness control without needing to point directly at the receiver.
Specifications
| Supply and output voltage | 12–24V DC |
|---|---|
| Maximum rated current | 30A total |
| Power at 12V | 360W maximum rated |
| Control | Three-button RF remote |
| Output channels | One, single-colour LEDs |
| Dimming method | PWM |
| Approximate size | 80 × 64 × 24mm |
Installation and compatibility
Use a DC power supply that matches the LED load voltage. Connect the supply and LED wiring to the labelled input and output terminals, observing polarity. Multiple compatible strips can share the receiver provided their combined current stays within the system’s limits.
This controller adjusts brightness on a single channel; it does not provide RGB colour selection or addressable-pixel effects. Install it in a dry location with appropriate wiring, protection and ventilation.
Actual wireless range depends on obstructions and the installation. Check the ratings marked on the supplied unit and allow suitable load headroom for continuous use.


